WORKSHOP PELATIHAN PEMBUATAN TULISAN BERJALAN DI LED P10 DENGAN MENGGUNAKAN HD-W00 BAGI SISWA/I JURUSAN REKAYASA PERANGKAT LUNAK DI SMK KARYA UTAMA

Ricki Ananda, Muhammad Amin, Nuriadi Manurung

Abstract


Abstract: Technological developments are growing every year, both in terms of social mobility, even in terms of educational development, seen from the development of educational media as practical aids or visual aids. This service uses a quantitative method, the choice of this method was because the research team collected data to determine the theme or research topic, such as the lack of student work in the form of hardware so that data is obtained in the form of student work products, at least in the form of hardware. The purpose of dedication to the main work of Private Vocational Schools, is to overcome the shortage of student work in the form of hardware by designing P10 LED products with W00. After doing this service, it can be concluded that the enthusiasm of the students in participating in the training activities can be seen from the many questions to the discussion of making the next product. The results of the service tool test show that sending data from Android to the HD-W00 module and LED P10, a maximum distance of 15 meters, with a voltage of 5VDC per LED P10 with a minimum current of 3A and using input from 12VDC / 3A power supply.

Keywords: LED P10; modul HD-W00; SMK Swasta Karya Utama

Abstrak: Perkembangan teknologi tiap tahunnya semakin berkembang, baik dari segi mobilitas sosial, bahkan dari segi perkembangan pendidikan, dilihat dari perkembangan media pendidikan alat peraktik atau alat peraga. Pengabdian ini menggunakan metode kuantitatif, pemilihan metode ini dikarenakan tim peneliti mengambil data untuk menentukan tema atau topik penelitian, seperti minimnya produk hasil karya siswa dalam bentuk hardware. Tujuan dari pengabdian di SMK Swasta karya utama, untuk mengatasi minimnya hasil karya siswa dalam bentuk hardware dengan cara merancangkan produk led p10 dengna W00. Setelah dilakukannya pengabdian ini dapat disimpulkan antusiasnya para siswa dalam mengikuti kegiatan pelatihan, dilihat dari banyak nya pertanyaan sampai dengan pembahasan tentang pembuatan produk selanjutnya. Hasil dari pengujian alat pengabdian didapati bahwa pengiriman data dari android ke modul hd-w00 dan led p10, berjarak maksimal 15 meter, dengan tegangan 5VDC pertiap led p10 dengan arus minimal 3A dan mengunakan input dari power supply 12VDC/3A.

Kata kunci: LED P10; modul HD-W00; SMK Private Karya Utama.


Full Text:

PDF

References


Hamdani, R., Puspita, I. H., & Wildan, B. D. R. W. (2019). Pembuatan Sistem Pengamanan Kendaraan Bermotor Berbasis Radio Frequency Identification ( Rfid ). Indept, 8(2), 5663.

Handyan, Y. S., & Suryana, E. (2018). Papan Informasi Digital Berbasis Arduino Dan Android Di Laboratorium Hardware Universitas Dehasen Bengkulu. Jurnal Teknologi Elektro, Universitas Mercu Buana, 9(1), 1015.

Helma, W., Alam, H., Syafrawali, J. W., & Bangun, R. . (2020). Rancang Bangun Running Text Led Display Jadwal Waktu Sholat Berbasis Arduino Uno Sebagai Media Informasi. Journal Of Electrical Technology, 5(2), 25023624.

Sitohang, E. P., Mamahit, D. J., & Tulung, N. S. (2018). Rancang Bangun Catu Daya Dc Menggunakan Mikrokontroler Atmega 8535. Jurnal Teknik Elektro Dan Komputer, 7(2), 135142.

Yuhanas, M., Charis Fathul Hadi, & Risk Fita Lestari. (2021). Rancang Bangun Running Text Menggunakan Modul Led Matrix P10 Berbasis Arduino Uno Di Fakultas Teknik Universitas Pgri Banyuwangi. Journal Zetroem, 3(2), 1622. Https://Doi.Org-/10.36526/Ztr.V3i2.1479

Ziad, I. (2017). Perancangan Drywash Sanitizer Berbasis Internet Of Things (Iot) Untuk Mendukung Pencegahan Penyebaran Covid-19. Jurnal Teknik Elektro, 9(1), 1823. Https://Journal.Unnes.Ac.Id/Nju/Index.Php/Jte/Article/View/10955/6659




DOI: https://doi.org/10.54314/jpstm.v3i1.1361

Article Metrics

Abstract view : 291 times
PDF - 111 times

Refbacks

  • There are currently no refbacks.


slot online