STUDI EKSPERIMEN VARIASI JUMLAH MATA PISAU TERHADAP LAJU PRODUKSI DAN PRESENTASI PRODUK GAGAL PADA MESIN TUSUK SATE
DOI:
https://doi.org/10.54314/jssr.v9i5.7292Keywords:
Bamboo, Satay Skewer Machine, Cutting Blades, Production Rate, Defective ProductsAbstract
This Study Aims To Analyze The Effect Of Variations In The Number Of Cutting Blades On The Production Rate And Percentage Of Defective Products In A Satay Skewer Machine. The Research Was Conducted Experimentally By Observing The Bamboo Cutting Process Using Different Numbers Of Cutting Blades. The Analyzed Parameters Included Production Time, Number Of Good Products, Number Of Defective Products, Production Rate, And Types Of Defects, Including Broken, Bent, Blunt-Pointed, And Cracked Products. The Test Results Showed That An Average Production Time Of 5 Minutes Resulted In 533.8 Good Skewers, 13.8 Defective Skewers, And A Total Production Of 547.6 Skewers. The Average Production Rate Reached 109.5 Skewers/Minute. Based On The Characteristics Of Defective Products, 24 Skewers Were Broken, 19 Were Bent, 24 Had Blunt Points, And 14 Were Cracked. These Results Indicate That Variations In The Number Of Cutting Blades Are Associated With The Machine's Production Capability And The Quality Of The Resulting Satay Skewers. The Optimal Blade Configuration Is Determined Based On A Balance Between A High Production Rate And A Low Percentage Of Defective Products.
Downloads
References
Amrizal Fahmi, M., Riandadari, D., Isnomo Abdi, F., Yasa Utama, F., Mesin, T., & Vokasi, F. (2023). Analisis Kecepatan Putaran Dan Jumlah Mata Pisau Stainless Steel Terhadap Hasil Produksi Pada Mesin Cutting Ubi Jalar. 08(02), 141–149. Https://Ejournal.Unesa.Ac.Id/Index.Php/Jurnal-Rekayasa-Mesin
Ganjar Kurnia, Et Al. (2025). Perancangan Mesin Pembelah Bambu Dengan Pisau Portabel Untuk Kapasitas 500 Bambu Per Jam. 10(1), 21–28.
Habibullah, M., Zaenudin, M., & Priyadi, M. U. Z. (2024). Pengaruh Variasi Jumlah Lubang Pisau Pemotong Kentang Pada Mesin Pengupas Dan Pemotong Kentang Sederhana Terhadap Kapasitas Dan Kualitas Pemotongan. Integrated Mechanical Engineering Journal, 2(2), 84–91. Https://Doi.Org/10.56904/Imejour.V2i2.60
Hong, M., Buck, D., Yuan, Z., Xu, C., & Zhu, Z. (2025). Multi-Factor Analysis Of Cutting Parameters For Bamboo Milling. Coatings, 15(10). Https://Doi.Org/10.3390/Coatings15101148
Ibrahim, N., Yasa Utama, F., Riandadari, D., Puspitasari, D., Mesin, T., & Vokasi, F. (2025). Pengaruh Mata Pisau Dynaflow Blade 4 Dan 12 Cutter Pada Mesin Pencacah Sampah Organik Terhadap Waktu Produksi. Jurnal Rekayasa Mesin (Jrm), 10(01), 450–455. Https://Ejournal.Unesa.Ac.Id/Index.Php/Jurnal-Rekayasa-Mesin
Ikram Kido.M. U. Ridhani. (2022). Rancang Bangun Mesin Pengirat Dan Penyerut Tusuk Sate (Vol. 6, Number 1). Http://Jurnal.Uts.Ac.Id
Korkmaz, M. E., Gupta, M. K., Sarikaya, M., Günay, M., Boy, M., Yaşar, N., Demirsöz, R., & Pehlivan, F. (2024). Analytical Modeling Methods In Machining: A State Of The Art On Application, Recent Challenges, And Future Trends. In Arabian Journal For Science And Engineering (Vol. 49, Number 8, Pp. 10287–10326). Springer Nature. Https://Doi.Org/10.1007/S13369-024-09163-7
Kristian, E., Zaenudin, M., & Indra, I. B. (2025). Pengaruh Jumlah Mata Pisau Dan Kecepatan Putaran Mesin Terhadap Kapasitas Produksi Dan Tingkat Kehalusan Jagung Pada Mesin Penggiling Jagung Sederhana. 26(1), 11–18.
Nurchayati, & et al. (2025). Alat pembelah bambu untuk meningkatkan produksi tusuk sate di Kelompok Sepakat Bersama, Bengkaung, Batulayar, Lombok Barat.
Rahmah, L., Sari, N. I. P., & Ansori, A. N. M. (2024). Diversity Of Sate (Satay) As Indonesian Ancient Food. Theory and Practice of Meat Processing, 9(2), 125–134. https://doi.org/10.21323/2414-438X-2024-9-2-125-134
Rohman, M. N., Hari Santoso, R., & Lestariningsih, W. (2025). Analisis pengaruh variasi kecepatan motor induksi dan jumlah mata pisau terhadap kinerja mesin pencacah botol plastik.
Saputra, A. A., Saputra, A. R., Romadhon, F., Syuhada, H. S., Affan, M., & Ramadhan, R. (2025). ANALISIS PERHITUNGAN MATA PISAU MESIN PENCACAH KERTAS ANALYSIS OF PAPER CHOPPING MACHINE BLADE CALCULATION.
Syahriza, M. R., Djumhariyanto, D., Ilminnafik, N., Darsin, M., Yudistiro, D., Basuki, H. A., Wibowo, R. K. K., Syuhri, A., & Sumarji, S. (2024). Optimization of the Number of Cylinder Blades in Coffee Pulper Machine: Finite Element Analysis and Simple Additive Weighting Methods. Journal of Mechanical Engineering Science and Technology (JMEST), 8(2), 476. https://doi.org/10.17977/um016v8i22024p476
Virgio Prasta, S., Aris Hendaryanto, I., Basuki, B., Krisnaputra, R., Septhia Irawati, I., Studi Teknologi Rekayasa Mesin, P., Vokasi, S., & Gadjah Mada, U. (2024). Analisis Pengaturan Inverter Terhadap Unjuk Kerja Mesin Planer Bambu V2 Dalam Menghasilkan Serutan Bambu Laminasi. 15(01). https://doi.org/10.35970/infotekmesin.v15i1.2009
Xiaojun, H., Ze, T., Yunjie, X., & Xun, G. (2025). Effect of milling parameters on cutting force and quality of vascular bundle fiber extraction in bamboo. https://doi.org/10.11833/j.issn.2095-0756.20240536
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Davis Bramantio Youdha, Rahmadsyah, Moraida Hasanah (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
